Insulating Fire Brick (IFB 2800)

Yufengrec  Fire Brick are made of high-grade refractory powder and material in good purity . During the process of production , organic and multiple filling materials are injected according to there required proportion ,the brick is compressed in vacuum and sintered under high temperature ,   for use in applications from 2300ºF (1260ºC) to 3000ºF (1650ºC).


Each type is formulated to meet specific thermal and physical requirements, and after firing is machined to precise tolerances. Made from high purity refractory clays and other ceramic raw materials, these IFB contain carefully graded organic filler which is burned out during manufacture to give a uniform, controlled pore structure. 


Key Features 

* Low iron content

* Resistance to thermal shock

*Low density 

*Low heat storage

* High insulating properties

* Energy saving

Typical Applications 

  * Primary hot face linings 

  * Back-up insulation for furnaces and kilns 

  * Flue insulation • Sulphur recovery equipment .

  * Hot blast stoves

  *Cracking Furnace

  *Ceramic Industry 

  *Continuous and batch kilns 

  *Power Generation 

  *Boiler insulation  etc …

Dimensions  

*230 x 114 x 64 mm 

*230 x 114 x 76 mm 

*Customized production for bricks with special dimension  is available 

Packing   

*230 x 114 x 64 mm , 668 pcs /pallet 

*230 x 114 x 76 mm , 560 pcs /pallet 

Packed in carton box : 

Brick are paved inside the cartons and normally  8 or 10 pcs of brick per carton box , this way of package is suitable for the procurement  in small quantity 

Packed in wooden pallet 

Bricks are paved onto the pallet in a row ,each layer shall be separated and the wooden case is wrapped by film , the cardboard around the four  side of pallet to protect bricks during long transportations 

The data are average results of test under standard procedures and are subject to variation. Results should not be used for specification purposes or creating any contractual obligation.