YUFENGREC® produce Light Weight Insulating Fire Brick (IFB) , with Al2O3 content more than 40% ,and Fe2O3 content 2.-2.5% , which is made of 65-85 % of clinker combined by fire clay , formed under high pressing and fired under 1400ºC in the tunnel kiln.
The insulating fire brick feature with high porosity, generally 40-85% , low bulk density , lower thermal conductivity , it is good mateiral for the insulating layer of all kind of industry furnace or oven . it can reduce the heat loss of the kiln ,save energy,But as such light weight insulating fire brick with poor mechanical strength , abrasion resisitance and erosion resistance , it is not suitable fro the load-bearing structure of kiln .
* Resistance to thermal shock
*Low heat storage
* High insulating properties
* Energy saving
* Primary hot face linings
* Back-up insulation for furnaces and kilns
* Flue insulation • Sulphur recovery equipment .
* Hot blast stoves
*Continuous and batch kilns
*Boiler insulation etc …
*230 x 114 x 64 mm
*230 x 114 x 76 mm
*Customized production for bricks with special dimension is available
*230 x 114 x 64 mm , 668 pcs /pallet
*230 x 114 x 76 mm , 560 pcs /pallet
Packed in carton box :
Brick are paved inside the cartons and normally 8 or 10 pcs of brick per carton box , this way of package is suitable for the procurement in small quantity
Packed in wooden pallet
Bricks are paved onto the pallet in a row ,each layer shall be separated and the wooden case is wrapped by film , the cardboard around the four side of pallet to protect bricks during long transportations
More detail techinal data and MSDS information, please contact us: firstname.lastname@example.org