Length:1200,1000,900 mm: | |
---|---|
Availability: | |
Quantity: | |
Yufeng Wool® Soluble Ceramic Fiber Board are made from soluble fiber and a small amount of organic binder .meet European regulatory requirements (Directive 97/69/EC)
Due to high fiber content , The Soluble Fiber Board are strong ,lightweight and good thermal shock resistant .
Key Features
* Low thermal conductivity.
*Waterproof
*Precise geometry and close tolerances .
*Thermal shock resistance.
*Homogeneous structure ,easy for matching *Non-brittle
*High Fiber content
*Lightweight ,low heat storage
*Easy to install
Typical Applications
*Refractory lining for industrial furnaces in wall, roofs ,doors ,stacks etc .
*Combustion chamber liners ,boilers and heaters
*Back-up insulation for brick and monolithic refractories
*Transfer of molten aluminum and other non-ferrous metals
*Expansion joints boards
*Barrier against flame or heat
*Hot face layer for high velocity or abrasive furnace atmosphere
Standard Size
Length/Width: 900 x 600 mm ,1000 x 500 mm, 1200 x 1000 mm
Thickness : 10-50mm , over 50mm is obtained by bonding resistance two thinner sheets .
Special size can be customized
Standard Packing
CARTONS , PALLET
TECHNICAL DATA
Unit | YUFENG WOOL ® SOLUBLE CERAMIC FIBER BOARD | |||
Soluble | mg/l | ≥ 200 | ||
Classification Temperature | ℃ | 1260 | ||
Max Working Temperature | ℃ | 1100 | ||
Color | White | |||
Moisture Content | % | ≤1 | ||
Organic Content | % | ≤6 | ||
Theoretical Density | Kg/M3 | 280 +/- 15 | ||
Compressive Strength | Mpa | ≥ 0.1 | ||
Thermal Conductivity at mean Temp. 500 ℃ | W/m.k | ≤0.153 | ||
Shrinkage on Heating | % | 1000 ℃ x 24 h ≤ -4 |
The data are average results of test under standard procedures and are subject to variation. Results should not be used for specification purposes or creating any contractual obligation.
Yufeng Wool® Soluble Ceramic Fiber Board are made from soluble fiber and a small amount of organic binder .meet European regulatory requirements (Directive 97/69/EC)
Due to high fiber content , The Soluble Fiber Board are strong ,lightweight and good thermal shock resistant .
Key Features
* Low thermal conductivity.
*Waterproof
*Precise geometry and close tolerances .
*Thermal shock resistance.
*Homogeneous structure ,easy for matching *Non-brittle
*High Fiber content
*Lightweight ,low heat storage
*Easy to install
Typical Applications
*Refractory lining for industrial furnaces in wall, roofs ,doors ,stacks etc .
*Combustion chamber liners ,boilers and heaters
*Back-up insulation for brick and monolithic refractories
*Transfer of molten aluminum and other non-ferrous metals
*Expansion joints boards
*Barrier against flame or heat
*Hot face layer for high velocity or abrasive furnace atmosphere
Standard Size
Length/Width: 900 x 600 mm ,1000 x 500 mm, 1200 x 1000 mm
Thickness : 10-50mm , over 50mm is obtained by bonding resistance two thinner sheets .
Special size can be customized
Standard Packing
CARTONS , PALLET
TECHNICAL DATA
Unit | YUFENG WOOL ® SOLUBLE CERAMIC FIBER BOARD | |||
Soluble | mg/l | ≥ 200 | ||
Classification Temperature | ℃ | 1260 | ||
Max Working Temperature | ℃ | 1100 | ||
Color | White | |||
Moisture Content | % | ≤1 | ||
Organic Content | % | ≤6 | ||
Theoretical Density | Kg/M3 | 280 +/- 15 | ||
Compressive Strength | Mpa | ≥ 0.1 | ||
Thermal Conductivity at mean Temp. 500 ℃ | W/m.k | ≤0.153 | ||
Shrinkage on Heating | % | 1000 ℃ x 24 h ≤ -4 |
The data are average results of test under standard procedures and are subject to variation. Results should not be used for specification purposes or creating any contractual obligation.
content is empty!