You are here: Home » News
  • May
    29
    Cordierite Kiln Furniture

    The Synthesize Cordierite are made from high quality raw materials, produced by wet process, calcining under high temperature . Due to its good thermal shock resistance ,thermal conductivity and low thermal expansion coefficient, This cordierite is an ideal raw material for kiln furniture refractory applications , honeycomb ceramics ,and other industries. The Synthesize Low-alumina Mullite is make from good natural mineral raw materials, produce by multi-stage homogenization process, calcining under high-temperature , it has special mullite-high silica glass complex microstructure, with excellent thermal expansion coefficient, good high temperature stability, etc. it is the most suitable aggregate for manufacturing of high-quality mullite cordierite kiln furniture. Widely used in kiln furniture manufacturing, precision casting, refractory bricks and other industries.

  • May
    19
    Nitride Bonded Silicon Carbide Kiln Furniture

    YUFENGREC®Nitride Bonded Silicon Carbide (NSiC )i s designed for exceptional wear resistance and can be formed into very intricate and precise shapes with the YUFENG unique process. It has desirable refractory and chemical properties, and can also exhibit exceptional wear and thermal shock resistanc

  • May
    19
    Introduction of main refractory brick and material for Coke Oven

    Introduction of main refractory materials for coke oven1. Silica brick Silica bricks are acidic refractory materials. It has good acid resistance erosion ability. Feature with good thermal conductivity , high load softening temperature. generally above 1620 ° C, The thermal conductivity of sil

  • Mar
    10
    Silicon Carbide Plate

    YUFENGREC OSIC Silicon Carbide Refractory Plate/Batts features with excellent heat resistance stability, extremely high temperature strength, good dimensional stability under high temperature and strong deformation resistance. Therefore, it is widely used in daily-use ceramic industries, such as

  • Oct
    29
    How to make monolithic refractories?

    The manufacture of monolithic refractories has the method of ramming molding, vibration molding and jet molding. When the masonry of the firebrick or the whole structure is partially damaged, the material can be replaced or the cold and hot repair can be carried out by spraying and projection equipment, which is both rapid and economical. It can also be used as the lining of each part of the kiln and the protective layer and joint material of masonry according to its material characteristics. The production process of refractory castables and refractory plastics is described below.

  • Oct
    22
    What are the different types of monolithic refractories?

    ​Monolithic refractories as a very important part of refractories, when the finalization of refractories can not meet the construction requirements, it is necessary to be monolithic refractories as the main construction materials. The construction of monolithic refractories is simple and efficient. They are mostly used for casting, kiln wall spraying, repairing, grouting, etc. According to the construction method and material properties, monolithic refractories can be divided into pouring material, plastic, ramming material, spraying material, dry mixing material, projection material and coating material.

  • Oct
    20
    What are the properties and advantages of monolithic refractories?

    Although the use of monolithic refractories has been for many years, it has not been generally accepted in the industry until the 1960s. Refractory aggregate, fine powder and binder (or additive) according to the use of the formula by the appropriate proportion of the mixture to form a monolithic refractory, can be used directly or can be added to the appropriate amount of liquid for use. In terms of transportation, monolithic refractories usually in the form of bulk materials, and then according to the use of the site requirements of different construction methods.

  • Oct
    14
    What is the history of monolithic refractories?

    Monolithic refractory material is a new type of refractory material, also known as non-burning refractory material or scattered refractory material, which can be directly used after delivery and molding and baking, without being fired in advance and loose mixture. With the material can be made into no joint lining and structures, so the monolithic refractory material. Monolithic refractories generally use cement as a binder. Here is a simple introduction to the history of monolithic refractories. According to the characteristics and application of monolithic refractories, it can be divided into three stages of development.

  • Oct
    11
    An introduction to monolithic refractories

    Monolithic refractories by a certain size grading refractory aggregate and powder, binder, admixtures and become refractory materials, also known as scattered refractory materials. Monolithic refractories are used for the lining of thermal equipment. They can be baked directly without firing. Compared with firebrick, monolithic refractories have a simple process (because of eliminating the burning process), energy saving, low cost, easy to mechanized construction and other characteristics, in some thermal equipment to use the effect is better than firebrick.

  • Oct
    01
    What are the main applications of insulating fire brick?

    There are many types of insulating fire bricks. When choosing insulating fire bricks in industrial kilns, it is necessary to choose the appropriate ones according to the actual use temperature inside the kiln, the use conditions of insulating fire bricks, the use cycle and other aspects. This article will introduce the main applications of insulating fire bricks.

  • Total 6 pages  Go to Page
  • Go