5000T/DAT Cement Production Line
After using our complete set of lining solutions , the rotary kiln perform well and stable.
The surface temperature of the rotary kiln body cylinder reduced by 40~50 °C compared with the previous configuration materials .17 month later , the rotary kiln was stopped and make the maintance
Our technial team made a observation into the rotary kiln
In the Burning Zone :the magnesia hercynite spinal brick with uniform and firm coating , in the 16m by punching test, the brick thickness 190 ~ 200mm.
In the Transition zone, the surface of the low thermal conductivity magnesia alumina spinal brick is smooth and flat, the thickness of the brick is 200~210mm at 27m position .
In the Decomposition Preheating Zone, Low thermal conductivity anti-spalling brick DDR-50 with smooth and flat surface, no alkali cracking. The thickness of the brick is 210~220mm at 35m position.
Low thermal conductivity and anti-spalling brick DDR-30 The surface of the brick is smooth and flat, no alkali cracking. The thickness of the brick is 215~220mm at 45m position
English